Preparation

Ensure all surfaces are sound, dry and free from excessive movement, oil, dust, grease, wax, curing compounds, release agents, paint and any other loose contaminating materials.
For non-porous surfaces, use SILCOR Primer SA or consult your local GCP Office.
When applying the primer onto floor surfaces it is recommended to firstly pour some primer in a section then spread the primer using a broom, brush or roller. Then continue this method of application until the entire area is primed. Note: This method of application ensures a thorough coat of the primer on the surface.
Allow the primer to dry for approximately 10 minutes at 20ºC prior to commencing tiling / waterproofing.

Coverage

Coverage will vary depending upon the substrate. As a guide it will cover approximately 8-10m²/L.

Excess primer, tools and other equipment can be cleaned up using water while the primer is still wet.

SILCOR Primer WA is supplied in 20L pail.
A pail of SILCOR Primer WA, when stored in a cool, dry environment, and is stored above ground level, will have a shelf life of approximately 12months.

Appearance   White Liquid
Density     1.10 +/- 0.05
Drying Time   Approx 30 minutes at 20ºC

Do not apply SILCOR Primer WA in temperatures above 40ºC and below 5ºC.
For applications / situations not mentioned in this data sheet please contact your nearest GCP office.
For a full SDS on this product please contact your nearest GCP office.
Not suitable for use on compressed cement laminar composite substrates such as Scyon Secura and similar products. Use NEWFLEX Primer S for these substrates.
Suitable for general warranty requirements. For warranty periods greater than 10 years, use EPOCOTE F100W for priming.