Two-part, UV-resistant protective coating
A tough, fast curing, non-slip, aliphatic polyurethane coating designed for protection of SILCOR® 580, SILCOR 780 HI-LP, SILCOR 790 HI/CHEMSPRAY 790 and SILCOR 990 MP (A)/CHEMSPRAY 690 membrane systems in all exposed situations. SILCOR Top Coat 80 is UV resistant - it provides a durable, service foot-trafficable finish to roof and deck areas.
SILCOR Top Coat 80 is used for colour-fast, non-slip exposed areas on plant room and lift motor room roofs, balconies, decks, perimeter turn-ups, penetrations and sill or window flashings. It may be used to give colour fast protection to all grades of SILCOR waterproof membranes used in exposed external situations.
Surface of SILCOR membrane must be clean and dry.
Mix each component separately with a clean stirrer blade, then combine together in a clean dry container and mix thoroughly with high speed dissolver for 5 minutes prior to application. Mix ratio Resin: Hardener is 5:1 by weight.
Apply in two coats by brush or roller – apply second coat in cross direction to the first to give a uniform finish. For spraying use a single wet-on-wet spray application.
Do not use mixed product once it has become thick and stringy, it should be discarded.
Do NOT add solvent.
| Drying Time @ 25ºC | 2 hours |
| Shore Hardness | 75-80°A |
| Tensile Strength (AS1145) | 2 MPa |
| UV Resistance (System) | Excellent |
SILCOR Top Coat 80 A/B mixed – minimum 0.3kg/m² for minimum 0.15mm Dry Film Thickness (DFT).
SILCOR Top Coat 80 Resin – 15 kg pails SILCOR Top Coat 80 Hardener – 3 kg pails
Do not store product exposed to weather and sun. When kept in a cool, dry, protected area, sealed pails have a 12-month shelf life, but once opened may solidify within a few days.
Use MULTITEK Xylene or methylated spirits before curing. Exercise care when using solvent, review all Material Safety Data Sheet (MSDS) before use.
Read and understand the product label and Safety Data Sheet (SDS) for each system component. All users should acquaint themselves with this information prior to working with the products and follow the precautionary statements. SDSs can be obtained by contacting your local GCP representative or office.
Information contained in this document does not cover all possible application scenarios or imply product suitability for an application. Please contact your local GCP representative or the GCP Technical Department for further information.
GCP and contractors recognised by GCP as experienced in the application of GCP products will provide warranties for individual projects. Warranty periods offered are dependent on project details and complexity. Requests for very long warranty periods may necessitate increased membrane thicknesses to ensure longevity.
Contact your local GCP representative for further details.
The information contained in this product data sheet supersedes all previous versions.
